Scheda tecnica:
Specifications
line
• gain range: +10db to +40db continuously variable
• input impedance: >1m ohm
mic
• gain range: 0 to +60db in 10db steps
• input impedance: variable as follows: 600 ohm, 1k4 ohm, 2k4 ohm, 6k8 ohm
• ein: -128db with 150 ohm terminating impedance at 60db of gain
• noise: -97dbu
• thd: 0.001% with -20dbu 1khz input and 20hz?22khz bandpass filter
compressor (vca mode)
• threshold range: -28db to +12db
• ratio: 1.5:1 to 10:1
• slope: soft knee
• attack: 100µs to 100ms
• release: 100ms to 7s, variable or auto (program dependent)
compressor (vintage opto mode)
• threshold range: -28db to +12db
• ratio: 1.5:1 to 5:1 in comp mode, 5:1 to 20:1 in lim mode
• slope: soft knee in comp mode, hard knee in lim mode
• attack: fixed
• release: fixed
eq
• low pass filter: 18db/oct from 400hz to 22khz
• high pass filter: 18db/oct from 20hz to 1k6hz
• parametric section is comprised of: low-mid & hi-mid parametric, each with continuously variable boost/cut with centre detent, frequency sweep control with two ranges, and fully variable q. low-mid frequencies 40hz to 400hz (120hz to 1k2hz when x3 is pressed). hi-mid frequencies 600hz to 6khz (1k8hz to 18khz when x3 is pressed)
• shelving section is comprised of: high frequency shelf: the frequency range steps are 1.5khz, 3.3khz, 6.8khz and 15khz (2.2khz, 4.7khz, 10khz and 18khz when hi range is engaged). low frequency shelf: the frequency range steps are 20hz, 56hz, 160hz and 460hz (33hz, 95hz, 270hz and 655hz when hi range switch is engaged)
gate
• threshold range: -40db to +10db
• gate range: 0 to -80db
• attack: switched fast or slow
• release: 100ms to 5s
• hold: 20ms to 4s
• expander ratio: 0 to 5:1
de-esser
• threshold range: 22db
• frequency range: 2k2 to 9k2
• ratio at centre frequency: 2:1
limiter
• threshold range: 20dbu
• ratio: infinite (brick wall)
• attack: frequency dependent
weight
• 7.58kg
• 16.7ibs
dimensions
• 484mm (w) x 85mm (h) x 250mm (d)
• 19" (w) x 3.5" (h) x 9.8" (d)